SpeedBox 1.6 for Bosch (Smart System Gen.5 + Rim M

SpeedBox 1.6 for Bosch Performance Line CX Gen5 motors removes the speed limiter for unrestricted riding. Designed for Smart System e-bikes with valve-mounted Rim Magnet, it offers simplified installation and activation via WALK function or button sequence. Real speed is not shown on display; accurate distance appears after countdown. Not compatible with ABS, SpeedBox App, or Gen4 motors.

SIMPLIFIED INSTALLATION No need to find a suitable position for the Magnet Simulator DESIGNED FOR MOTORS: Performance Line CX - 5th Generation (motor mounted with 2 bolts) PROPERTIES: Maximum speed: Unlimited (max 35 km/h recommended) Display shows: Real speed: NO Correct travelled distance: After the countdown process is finished Activation/deactivation (do not perform while riding): WALK function Buttons - + - + Indication of tuning activation/deactivation: YES (3.5/2.5 km/h) Compatible with: Performance Line CX - 5th Generation E-bikes that have a magnet attached to a valve (Bosch Rim Magnet) The current Bosch software version View the list of supported software versions Not compatible with: Standard magnet ABS system SpeedBox App Motors of 4th generation Please check your e-bike type and motor space before purchasing the product View the list of supported software versions Not compatible with: Bosch Rim Magnet ABS system SpeedBox App SpeedBox 1.6 for Bosch (Smart System Gen.5 + Rim Magnet) SpeedBox 1.6 is a premium tuning chip designed for Bosch Performance Line CX motors (5th Generation) equipped with the Smart System and valve-mounted Rim Magnet. It removes the factory speed limiter, allowing assisted speeds beyond 25 km/h (recommended max: 35 km/h), while maintaining smooth motor operation and intuitive control. Key Features Simplified installation with no need for magnet simulator positioning Activation via WALK assist or button sequence (- + - +) Adjustable speed limit up to 99 km/h (35 km/h recommended) Display behavior: Real-time speed: Not shown Accurate distance: Displayed after post-ride countdown Tuning status: Indicated by 3.5 km/h (ON) / 2.5 km/h (OFF) Compatibility Bosch Performance Line CX (Gen.5, motor mounted with 2 bolts) E-bikes using Bosch Rim Magnet (valve-mounted) Current Bosch Smart System software versions [View supported software versions] Not Compatible With Standard spoke-mounted magnets Bosch ABS system SpeedBox App Bosch Gen.4 motors Installation & Use SpeedBox 1.6 connects via original Bosch connectors for secure and reversible installation. After setup, activate tuning while stationary using WALK assist or the button sequence. To set a custom speed limit, switch modes in the following order: TURBO → eMTB → TOUR+ → ECO → TOUR+ → eMTB → TURBO The display will show the selected limit (e.g., 3.5 km/h = 35 km/h). After 15 seconds of inactivity, the setting is saved. After riding, leave the bike powered on until the display shows 0.0 km/h. This ensures proper data logging and safe shutdown. Do not remove the display before the countdown completes. Legal & Safety Notice SpeedBox products are intended for use on private property only. Use on public roads may violate local laws and void your e-bike’s warranty. Always wear protective gear and disable automatic firmware updates via the eBike Flow App to prevent tuning detection. Additional Notes Ride at least 10 km before activating tuning on a new bike Countdown duration may vary after long rides Activate/deactivate tuning only while stationary Do not exceed 35 km/h to avoid error codes