Pedro's Master Tool Kit 4.0 - 59-Tool Professional Event Kit in Wheeled Case

Pedro's Master Tool Kit 4.0 - 59-Tool Professional Event Kit in Wheeled Case
Professional event tool kit with 59 tools and an extensive 1/4in hex bit selection, in a lockable 56 x 35 x 23cm wheeled case that is dustproof (IP6X), waterproof (IP7X) and MIL-spec certified. Customisable panels and clips, two parts trays and a Burrito Tool Roll II that hangs on the case. 14.7kg.

Pedro's Master Tool Kit 4.0 - 59-Tool Professional Event Kit in Wheeled Case

Pedro's Master Tool Kit has been used by mechanics at events since 2004. The 4.0 edition updates everything: 59 professional tools including many new and updated items, plus an extensive selection of 1/4in hex bits, covering drivetrain, bottom bracket, crank, pedal, cassette, chain, wheel, brake, torque and cleaning work.

The heavy-duty wheeled case is built to be customised. A lid-mounted panel pre-drilled with a 325-hole array and a multi-position lower divider with more tappable holes let you lay out tools your way, using the included clips, tap and screws. Two parts trays with hinged lids nest inside the case for transport or mount outside with slots for staging tools, and the Burrito Tool Roll II hangs flush on the front of the case as a tool board.

Key Features

• 59 professional tools plus an extensive selection of 1/4in hex bits
• Includes Pro Chain Tool 3.2, Fixed Torque Driver 5Nm, full hex/Torx sets, BB and cassette sockets, chain whip and pliers
• 56 x 35 x 23cm heavy-duty wheeled case
• Lockable, dustproof (IP6X), waterproof (IP7X) and MIL-spec certified
• Heavy-duty latches and automatic pressure release valve
• 3 handles: 2 carry, 1 retracting
• Customisable lid panel and lower divider (two primary positions, three sub-positions)
• Parts trays nest inside or mount outside the case
• Burrito Tool Roll II hangs on integrated hooks on the front of the case
• Total kit weight 14.7kg
• Case backed by a lifetime warranty

In the Box

• Pro Travel Pedal Wrench (also a socket driver for Pedro's socket tools)
• Cable Cutter
• Diagonal Cutter Pliers - 150mm (6in)
• Toothbrush drivetrain cleaning brush
• The Hammer - 275mm, 550g, replaceable plastic face
• Pro TL II Hex wrenches: 3, 4, 5, 6mm
• Pro TL II Torx wrenches: T10, T25, T30
• Quick Link Pliers
• Disc Wrench - 7 and 8mm flare wrench and rotor truing slot
• Utility Knife
• Crowfoot Flare Wrench - 7 and 8mm, 1/4in drive
• Splined BB Socket - 3/8in drive
• 8mm Hex Driver II
• Tyre Levers (pair)
• T-Handle Bit Drive
• Ratcheting Combo Wrenches - 9 and 10mm
• L Hex Set - 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
• L Torx Set - T10, T15, T20, T25, T27, T30, T40
• Freewheel Socket, Multi-Speed 12-Spline x 23mm
• Pro Cassette Lockring Socket with Pin (5mm guide pin and removable 12mm pin)
• Hex Bit Set, 1/4in hex, 25mm: JIS #1 and #2 Phillips, 5mm flat blade, 2, 2.5, 3, 4, 5, 6mm hex, T10, T15, T20, T25, T30 Torx, plus 1/4in hex to 1/4in square adapter
• Hex Bit Set, 1/4in hex, 50mm: 4 and 5mm hex, T25 and T30 Torx
• External Bottom Bracket Socket 16x44
• BB Socket Holder II
• Compact Crank Puller
• Adjustable Wrench - 250mm (10in), opens to 33mm
• Pro Chain Whip - 270mm, fixed-gear lockring wrench
• Needle Nose Pliers - 150mm (6in)
• Pro Chain Tool 3.2
• Pro Spoke Wrench Set - 3.23, 3.30, 3.45mm
• Chain Checker Plus II
• Tape Measure
• Downhill Tyre Lever - 275mm steel
• Pro Chain Keeper (12mm thru-axle compatible)
• Fixed Torque Driver 5Nm (with 4mm, 5mm and T25 bits)
• Pro Bit Driver - JIS #1 and #2 Phillips, 5mm flat blade
• Pro Bit Driver - 2 and 2.5mm hex, T25 Torx
• Crank Adjusting Cap Driver (Shimano Hollowtech II)
• Heavy-duty wheeled case, 56 x 35 x 23cm
• Burrito Tool Roll II with x-frame poles and hang strap
• 2 x parts trays with removable hinged lids
• Upper case tool panel (325-hole array)
• Lower case divider panel with divider mounts
• Foam spacer
• Tool clips: 6mm x 10, 10mm x 10, 13mm x 5, 16mm x 10, 19mm x 5
• 50 x M2.5x0.45 clip mounting screws
• M2.5x0.45 tap
• 20 x spare panel mount screws

How to Use

1. Burrito x-frame: take the pole halves from their storage slots (keep the rubber end caps) and join them. Lay the Burrito face down, fit one pole into a corner pocket and the diagonally opposite corner, flexing it slightly; repeat with the second pole.
2. Hanging the Burrito: fit the x-frame first, push the case latches flat, fold the Burrito flap tightly to the back, and hold it by the hang strap while pressing its hooks into the holes on the front of the lower case.
3. Adjusting the divider: loosen the mounting screws with a #2 Phillips, move the divider mounts to the desired position and slot, then refit.
4. Custom clips: thread any panel hole with the included M2.5x0.45 tap and fit clips with the clip mounting screws.

Good to Know

• The holes on the front of the lower case can also be used to padlock the case (no padlock is listed in the contents).

Care & Safety

Case mounting screws should be tightened by hand only until snug. Do not over-tighten.